How to Choose and Set Up a Recurve Bow Sight
You have survived your first few months at the range. Your form is settling, your arrows are grouping — and now your coach, or a fellow archer, mentions it is time to put a sight on your bow. Suddenly you are staring at a shelf of pins, extensions, scopes, and micrometer wheels, wondering where to start.
This guide explains what recurve bow sights do, how to choose the right one for your stage of shooting, and how to set it up so your first arrows with a sight actually land where you intend them to.
Why Use a Sight at All?
Barebow and instinctive shooting have real value — many experienced archers train without a sight specifically to sharpen feel and body awareness. But for Olympic-style recurve, using a sight is part of the discipline. A sight gives you a repeatable reference point that removes guesswork from your aim and lets you trace errors back to form rather than aim variation.
Beyond competition, a properly fitted sight simply makes practice more productive. You learn faster because feedback is cleaner.
The Anatomy of a Recurve Sight
A recurve bow sight has three main parts:
- The bar (extension arm): attaches to the riser's sight mounting holes and projects the sight block forward — the further forward, the finer your aim.
- The sight block: moves up and down (elevation) and left-right (windage) to adjust where your arrows hit.
- The aperture or pin: the small element you actually look through or align with the target.
Some sights add a scope (a small lens) in the aperture for magnification. These are permitted in Olympic recurve but not in barebow or most traditional categories — always check your federation's rules before buying.
Types of Apertures: Pin vs Scope
For beginners and many club-level archers, a simple pin aperture works well. It is a thin metal or plastic pin — sometimes with a coloured dot — that you align with the gold. No magnification, low cost, nothing to break.
A scope aperture (also called a lens or tunnel sight) contains a small lens, typically 2× to 6× magnification, and usually a coloured dot or fibre ring inside. It is the standard for serious Olympic recurve shooting. The lens makes the target clearer and the dot easier to centre, but it requires a consistent anchor and eye alignment to avoid lens distortion errors.
If you are just moving off barebow, start with a pin. Once your form is consistent — typically after six to twelve months of regular coached practice — a scope becomes genuinely useful.
What to Look for When Buying a Recurve Sight
Extension Length
Longer extensions (more reach forward) produce finer aiming — small errors in eye alignment translate to smaller errors on the target. Standard extension bars range from roughly 10 cm to 32 cm. Beginners can start with a medium extension; advanced archers generally prefer the longest bar their bow and style allow.
Adjustment Mechanism
Look for smooth, backlash-free adjustments with clear click increments and a locking screw or clamp. Cheap sights drift between sessions; better-quality sights hold their zero reliably. Micrometer adjustments (measured in fractions of a millimetre per click) make it easy to log and repeat your settings for different distances.
Build Material
Aluminium sights are the standard — light, rigid, and corrosion-resistant in humid range conditions. Plastic components are acceptable on entry-level sights but tend to flex and lose zero. Carbon-fibre bars are used by elite archers for maximum stiffness at minimum weight.
Compatibility
Most recurve risers use a standard two-hole sight mounting pattern. Confirm this before buying. Some risers use a proprietary pattern — check your riser's manual or the manufacturer's website.
Browse the full range of recurve sights and aiming systems on Archery Asia to compare options suited to the Indian market.
How to Mount and Set Up Your Sight
Once you have your sight, follow these steps to get started:
- Attach the bar to the riser — tighten the mounting screws firmly but do not over-torque on aluminium threads. The bar should be parallel to the arrow shelf.
- Set a rough starting position — with the sight block centred in windage and roughly mid-height, nock an arrow and draw to your anchor.
- Shoot at a close distance first — 5–8 metres is enough. This is not about accuracy; it is about getting arrows on the target so you can read the pattern.
- Move the sight in the direction of the miss — arrows hitting left? Move the sight left. Arrows hitting low? Move the sight down. The sight chases the arrow group.
- Increase distance gradually — once you are grouping consistently at close range, move out to 10 m, then 18 m, then 25 m, recording your sight mark at each distance.
Recording Your Sight Marks
Every experienced archer keeps a sight mark book — a small notebook or phone note logging the sight position for each distance, arrow type, and limb weight. When you change limbs, strings, or arrows, your old marks give you a head-start rather than starting from scratch.
Record: distance, sight block height, windage position, arrow spine and length, draw weight (in both lbs and kg — standard Indian club notation often uses kg), and date. If you are unsure what draw weight suits your frame, the free bow guide and poundage calculator at dealer.archeryasia.com/guide covers this in detail and is available in 20 languages including Hindi and Tamil.
Common Mistakes to Avoid
- Peeping through the sight before the bow is at full draw — your eye position must be consistent. Anchor first, then aim.
- Over-tightening the aperture — a cracked scope housing is an expensive mistake. Firm is enough.
- Skipping the close-distance stage — archers who go straight to 18 or 25 m with a new sight spend far too long chasing groups. Start close.
- Ignoring windage — many beginners adjust only elevation. If your groups are consistently left or right, correct the windage before moving to longer distances.
- Buying a sight before your form is stable — a sight magnifies form errors. If you are still rebuilding anchor, stance, or draw, ask your coach whether you are ready.
Quick Checklist Before Your First Session with a New Sight
- ✅ Mounting screws tightened and bar parallel to arrow shelf
- ✅ Aperture secured and lens (if any) clean and unscratched
- ✅ Starting distance set to 5–8 m
- ✅ Sight block centred in windage
- ✅ Notebook or phone ready to log first sight marks
- ✅ Draw weight confirmed as appropriate for your strength
- ✅ Coach or experienced archer available to observe your first few ends
Getting Help and Finding Equipment Near You
Choosing a sight is easier with hands-on advice. If your local club or range coach can let you try a few options before committing, take that opportunity. If you are still looking for a coach or a range that stocks quality equipment, the coach and range finder at dealer.archeryasia.com lists verified coaches, clubs, and stores across India and Asia.
For archers buying or selling second-hand sights — a smart move at the intermediate stage when you are still experimenting — the Archery Asia used gear marketplace includes buyer protection so you are not taking a risk on condition or authenticity.
Next Steps
Once your sight is mounted and your first marks are recorded, the next logical step is exploring how your arrows interact with your setup. Spine selection, point weight, and arrow length all affect where the sight needs to sit at a given distance — a topic worth reading up on once you are grouping consistently with your new sight.
When you are ready to browse sights, scopes, and all the accessories that go with them, the full sights collection at Archery Asia is a good starting point. And if you have not already registered for a free archer account — which gives you access to guides, the marketplace, and wholesale pricing if you are a club or shop — sign up at dealer.archeryasia.com/register.
Good shooting.